• Model MLA-10 has one side connection and one support ring. These units are mounted on the side of a vessel or tank and can withstand pressures up to 10 barg (145psi). The process temperature is between -45 ° C and + 400 ° C.
  • Model MLA-150 has one side connection and one support ring. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 10 barg (145psi). The process temperature is between -45 ° C and + 400 ° C.
  • Model MLB-10 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 10 barg (145 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLB-16 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 16 barg (232 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLB-40 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures  up to 40 barg (580 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLB-150-1 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 10 barg (145 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLB-150-2 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 16 barg (232 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLB-300 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 40 barg (580 psi). The process temperature is between -45 ° C to + 400 ° C.
  • High pressure appliances Model MLB-600 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 82 barg (depending on model). The process temperature is between -45 ° C to + 400 ° C (depending on process pressure).
  • High pressure appliances Model MLB-900 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 148 barg (depending on model). The process temperature is between -45 ° C to + 400 ° C (depending on process pressure).
  • High pressure appliances Model MLB-1500 has two side connections. These units are mounted on the side of a vessel or tank and can withstand pressures of up to 192 barg (depending on model). The process temperature is between -45 ° C to + 400 ° C (depending on process pressure).
  • Connection between two pipes. Model MLC-40 has 1 process connection at both the bottom and top. These devices are placed between two pipes and can withstand pressures of 40 barg (580 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Connection between two pipes. Model MLC-300 has 1 process connection at both the bottom and top. These devices are placed between two pipes and can withstand pressures of 40 barg (580 psi). The process temperature is between -45 ° C to + 400 ° C.
  • Model MLD-10 consists of a tube with a process connection welded in the middle. There are two floats in the tube that are connected to each other through  a titanium tube. The lower part is inserted from the top into the vessel or tank. The level gauge is mounted by means of two flanges, the first flange is on the vessel and the second flange, the one on the level gauge, is connected to this. If the bottom float moves up and down with the liquid level, the top float moves along with it. This allows you to read the liquid level on the indicator rail at the top. The level gauges can withstand pressures up to 10 barg (145 psi). The process temperature is between -45 ° C and + 400 ° C.
  • Model MLD-40 consists of a tube with a process connection welded in the middle. There are two floats in the tube that are connected to each other through  a titanium tube. The lower part is inserted from the top into the vessel or tank. The level gauge is mounted by means of two flanges, the first flange is on the vessel and the second flange, the one on the level gauge, is connected to this. If the bottom float moves up and down with the liquid level, the top float moves along with it. This allows you to read the liquid level on the indicator rail at the top. The level gauges can withstand pressures up to 40 barg (580 psi). The process temperature is between -45 ° C and + 400 ° C.
  • Model MLD-150 consists of a tube with a process connection welded in the middle. There are two floats in the tube that are connected to each other through  a titanium tube. The lower part is inserted from the top into the vessel or tank. The level gauge is mounted by means of two flanges, the first flange is on the vessel and the second flange, the one on the level gauge, is connected to this. If the bottom float moves up and down with the liquid level, the top float moves along with it. This allows you to read the liquid level on the indicator rail at the top. The level gauges can withstand pressures up to 10 barg (145 psi). The process temperature is between -45 ° C and + 400 ° C.
  • Model MLD-300 consists of a tube with a process connection welded in the middle. There are two floats in the tube that are connected to each other through a titanium tube. The lower part is inserted from the top into the vessel or tank. The level gauge is mounted by means of two flanges, the first flange is on the vessel and the second flange, the one on the level gauge, is connected to this. If the bottom float moves up and down with the liquid level, the top float moves along with it. This allows you to read the liquid level on the indicator rail at the top. The level gauges can withstand pressures up to 40 barg (580 psi). The process temperature is between -45 ° C and + 400 ° C.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a switch or a guided radar can be mounted.  There are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.
  • MLG Instruments - Schiedam offers the possibility to supply a Bridle that is suitable for radar sensors or switches. A Bridle (radar housing) is a vertical tube that is connected to a tank or a vessel. The Bridle can be used separately on which a guided radar can be mounted or a switch. Of course there are also possibilities to place the switches as guided radar on 1 Bridle. Combination Magnetic level gauge with a Bridle: The combination of a Bridle with a magnetic level gauge offers the advantages of both visual display and electronic level monitoring. In addition, this product is also extremely suitable for applications where interface measurements are required. Various radar sensors or switches can be mounted on the bridles.

Go to Top